Belisar Chronograph
D009.427.16.262.02
Sporty, stylish, unmistakeable: this men's watch unites nostalgic detailing with timeless good looks – not to mention Glashütte's unwavering precision, from a movement housed inside a round stainless steel case measuring a generous 44 mm in diameter. The UNG-27.S1, which features a silicon balance spring and a high power reserve of at least 65 hours. The push-buttons and crown on the right-hand edge of the case create an attractive design feature while also allowing for easy operation. Anti-reflective coating on both faces of the crystal, screwed-on flanks and a black nubuck leather strap with light-coloured stitching complete the look.
The timepiece is water-resistant up to a pressure of 10 bar (100 m).
€2,950.00
Find a retailer
- Made in Germany
Description
The powerful Belisar models appeal to any individualist with an active lifestyle. Whether sporty, elegant or with a retro character – these timepieces are the perfect companion, capturing the imagination with their complex functions and colourful elements. The classic screw-down flanks are not only eye-catching but they also allow for unusual combinations of materials.
Technical specs
-
Collection
BELISAR
-
Warranty
2 Years of Warranty
-
Water resistance
Water-resistant up to a pressure of 10 bar (100 m)
-
Weight (g)
120
The Union Glashütte user's manual give information about the use, the settings and the maintenance of the different Union Glashütte watches.
UNG-27.S1
Movement dimensions: 13 ¼“, dia. 30.00 mm, height 7.90 mm
Functions: hours, minutes and small second, dial windows for day,
day correction using push-button at 10 o‘clock,
chronograph function with 60-second, 30-minute and 12-hour counters, chronograph mechanism
with cams, 3 push-buttons, automatic winding with ball bearing, silicon spring, indexless regulation
system, second stop
Stones: 29
Power Reserve: at least 65 hours
Frequency: 28,800 vibrations per hour (4 Hz)
silicon balance spring
UNION GLASHÜTTE uses Silicon, a chemical element of the family of metalloids, in the manufacture of balance springs.
By use of Silicon, our watches are insensitive to magnetic fields, temperature fluctuations and shocks. They are very stable in shape and resistant to oxidation.
The silicon spiral guarantees higher power stability in our mechanical movements - so your watch runs precisely anytime, anywhere.
You can recognize the use of the silicon spiral in your UNION GLASHÜTTE watch by the Si-poster that our watchmakers set and align by hand.
STAINLESS STEEL
The only grade of steel used by Union Glashütte is stainless steel 316L. This alloy is characterised by its excellent anti-corrosion properties.
For the relevant watches, the following components are produced from this material: cases, bracelets, double fold fasteners with two push buttons (decorated).
Saphir
The sapphire used by Union Glashütte for its crystals is a white, synthetic sapphire. Thanks to its hardness rating of 9, this crystal can only be scratched by very hard diamond-like substances.
Union Glashütte watches only use double-sided anti-reflective sapphire crystals. As there are no reflections on the crystal, the full splendour of the dial is revealed.
LEATHER
Union Glashütte uses primarily calfskin for its straps, either smooth or with a crocodile skin finish, as well as cowhide, cordovan or goatskin.
Water resistance
All Union Glashütte watches are water-resistant as follows:
Men's watches up to 10 bar (100 m)
Ladies' watches up to 5 bar (50 m)
Gold watches up to 3 bar (30 m).
The water resistance cannot be guaranteed indefinitely. It may become compromised by ageing of the seals or knocks to the crown or push-buttons. We therefore recommend that you have the water resistance of your watch checked once a year by an approved Union Glashütte Service Centre and, if required, that you replace any defective parts.
Do not open the watch yourself under any circumstances.