Belisar Chronograph Moon Phase
D009.425.16.087.00
The moon phase display is one of the most traditional complications in watchmaking. UNION GLASHÜTTE has given it a modern facelift: A round 44 mm stainless steel case with a striking dial design provides the perfect backdrop for the Belisar Chronograph Moon Phase. The push-buttons on the chronograph mechanism are accompanied by a discreet corrector positioned at 10 o'clock, which enables the wearer to set the day of the week separately. Among its other attributes are the anti-reflective coating on both faces and water resistance of up to 10 bar (100 m). A grey nubuck leather strap adds the finishing touch.
€3,600.00
Find a retailer
- Made in Germany
Description
The powerful Belisar models appeal to any individualist with an active lifestyle. Whether sporty, elegant or with a retro character – these timepieces are the perfect companion, capturing the imagination with their complex functions and colourful elements. The classic screw-down flanks are not only eye-catching but they also allow for unusual combinations of materials.
Technical specs
-
Warranty
2 Years of Warranty
-
Weight (g)
124.000
-
Water resistance
Water-resistant up to a pressure of 10 bar (100 m)
-
Collection
BELISAR
The Union Glashütte user's manual give information about the use, the settings and the maintenance of the different Union Glashütte watches.
UNG-25.S1
Movement dimensions: 13 ¼ ''', dia. 30.00 mm, height 7.90 mm
Hours, minutes, small second
Date display via hand
Day, month and moon phase display in dial windows
Date correction via corrector at 10 o'clock
24-hour hand
Chronograph 60 seconds, 30-minute and 12-hour counter
Chronograph mechanism with cams
2 push-buttons, 1 corrector
Self-winding with ball bearing, 65-hour power reserve
Silicon balance-spring
Second stop device
28,800 vibrations per hour (4 Hz)
29 jewels
silicon balance spring
UNION GLASHÜTTE uses Silicon, a chemical element of the family of metalloids, in the manufacture of balance springs.
By use of Silicon, our watches are insensitive to magnetic fields, temperature fluctuations and shocks. They are very stable in shape and resistant to oxidation.
The silicon spiral guarantees higher power stability in our mechanical movements - so your watch runs precisely anytime, anywhere.
You can recognize the use of the silicon spiral in your UNION GLASHÜTTE watch by the Si-poster that our watchmakers set and align by hand.
STAINLESS STEEL
The only grade of steel used by Union Glashütte is stainless steel 316L. This alloy is characterised by its excellent anti-corrosion properties.
For the relevant watches, the following components are produced from this material: cases, bracelets, double fold fasteners with two push buttons (decorated).
Saphir
The sapphire used by Union Glashütte for its crystals is a white, synthetic sapphire. Thanks to its hardness rating of 9, this crystal can only be scratched by very hard diamond-like substances.
Union Glashütte watches only use double-sided anti-reflective sapphire crystals. As there are no reflections on the crystal, the full splendour of the dial is revealed.
LEATHER
Union Glashütte uses primarily calfskin for its straps, either smooth or with a crocodile skin finish, as well as cowhide, cordovan or goatskin.
Water resistance
All Union Glashütte watches are water-resistant as follows:
Men's watches up to 10 bar (100 m)
Ladies' watches up to 5 bar (50 m)
Gold watches up to 3 bar (30 m).
The water resistance cannot be guaranteed indefinitely. It may become compromised by ageing of the seals or knocks to the crown or push-buttons. We therefore recommend that you have the water resistance of your watch checked once a year by an approved Union Glashütte Service Centre and, if required, that you replace any defective parts.
Do not open the watch yourself under any circumstances.
